The RFMV1300 CNC vertical machining center is one in a family of RIFA built VMCs. The machine packs a 4500rpm spindle speed and 15m/min rapid traverses. The X, Y, Z axis range is 1300mm× 750mm×700mm. A 1400mm×600mm T slotted table is included.

Features 

1. The machine base, column, head and cross slid carriage of the CNC vertical machining center are constructed from high quality cast iron. An advanced machine construction, widened and fixed column design provide added rigidity and durability. Finite element analysis procedures are used to qualify the design.
2. Hardened sliding guide ways are used for the X, Y and Z axis motions, providing increased rigidity. 
3. Servos couple directly to the high precision ball screws of the CNC vertical machining center, eliminating gears and preventing backlash and servo drag. 
4. The pre tensioned ball screws provide increased rigidity and thermal stability.
5. The spindle is supported by six permanently lubricated precision bearings, which are true cartridge type units. A refrigerated spindle cooling system circulates oil around the spindle and bearings of the CNC vertical machining center. This maintains constant temperatures across a range of ambient and operating conditions.
6. An encoder is mounted on the spindle, realizing rigid tapping as well as accurate positioning.
7. A FANUC 0iM controlling system is standard. MITSUBISHI is optional.

The Key Standard Features of the CNC Vertical Machining Center

1. Stiff and thermally stable spindle in which cutting tool is clamped through tool holding device. 
a. Its 50 taper spindle is supported by six precision class permanently lubricated bearings. FAG bearings are standard.
b. 11kw/15kw (30 minutes) spindle motor drive: 4500 gear RPM 
2. Bidirectional, 24 tool arm type BT50 automatic tool changer
3. Massive cast iron construction, fixed column design
4. Hardened sliding guide ways
5. Feed ball screw with FAG bearings
6. P50T-I retention knobs (pull studs)
7. Splash guard and protection guard from Germany Trumpf
8. Centralized lubrication system
9. Spindle taper cleaner, spindle cooling system
10. Surround tool coolant
11. RS232 interface and DNC function
12. Work light, warning indication
14. Electric cabinet with heat exchanger 
15. Rigid tapping
16. FANUC 0Icontrol unit

Technical Specifications of the RFMV1300 CNC Vertical Machining Center