HSV-162A is a digital two-axis AC servo drive. One HSV-162A servo drive can control two permanent magnet synchronous AC servo motor. HSV-162A uses the latest Digital Signal Processor (DSP) for motion control, Complex Programmable Logic Device (CPLD), and Intelligent Power Module (IPM). It features small size, easy installation, and easy commissioning. HSV-162A takes full use of processing chips and saves installation space. It is the preferred feed drive for your economical CNC machines.
Features
Three control modes
Small size, easy wiring, and easy
installation
Modifiable axial parameters that can be
changed on the operation panel to meet the requirements for various motors and
loads
Built-in high-power braking resistor to
meet the requirements of servo motors for frequent start and stop
High heat dissipation capability with
air-cooling
Perfect protection function such as over
voltage, unedr voltage, over current, overload, and over speed detection
Full digital control mode and configurable control parameters to meet various application requirements, and applicable to various open loop and semi-closed loop CNC systems to achieve precise position control
Specifications
Item |
Description |
||||||||||||
Power supply |
Three-phase AC 220V -15% to
+10% 50/60Hz |
||||||||||||
Output current |
|
||||||||||||
Working environment |
Temperature |
Working temperature: 0-55℃ Storage: -20-80℃ |
|||||||||||
Humidity |
Less than 90% (no dew) |
||||||||||||
Vibration |
Less than 0.5 G (4.9 m/S ), 10-60 Hz
(Non-continuous running) |
||||||||||||
Control mode |
Positon control JOG control Internal speed control |
||||||||||||
Regenerative braking |
Built-in |
||||||||||||
Character |
Speed frequency response |
300 Hz or more |
|||||||||||
Speed fluctuation rate |
< ± 0.10% (load: 0-100%, rated
voltage) < ± 0.02% (Power supply: -15-10%,
empty load) |
||||||||||||
Speed regulatin ratio |
1 : 6000 |
||||||||||||
Input pulse frequency |
≤ 500 kHz |
||||||||||||
Control input |
Servo enabling Alarm clear |
||||||||||||
Control output |
Servo already Servo alarm |
||||||||||||
Position control |
Imput mode |
Two-phase A/B positive pulse Pulse + direction CCW pulse/CW pulse |
|||||||||||
Electrical gear |
1-32767/1-32767 |
||||||||||||
Feed pulse |
A maximum of 25000 pulse/revoltation |
||||||||||||
Acceleration and deceleration |
Parameter setting: 1-10000ms
(0-2000rpm or 2000-0rpm) |
||||||||||||
Monitoring funciton |
Speed, current position, command pulse
accumulation, position error, motor torque, motor current, rotor position,
cmmand pulse frequency, and running state |
||||||||||||
Protection function |
Over speed, over voltage and under
voltage, overload, brake error, encoder error, and position error |
||||||||||||
Operation |
6-bit LED digital tube and five keys |
||||||||||||
Load inertia |
Five times less than the motor inertia |
||||||||||||
Size
Aluminum slit strips: a precision slitting line with minimal burring enables tension-free custom cutting for coil widths up to 2,100 mm
As a leading CNC system supplier in China, WEIHONG is now take a big step to expanding the overseas market.